Zirconia

DESCRIPTION

For all work on natural teeth or on implant interfaces, the Zirconia frameworks by Bioinnovación Dental offer biocompatible solutions with high aesthetics, thanks to our wide range of Zirconia materials, offering high ceramic strength and different levels of translucency.

Bioinnovación Dental is flexible in adapting to different needs, offering a wide range of Zirconia ceramics, both single layer and multi-layer, with a variety of hardness properties and colours, as well as different qualities to meet the expected result.

Request details of our extremely wide range of Zirconia solutions.

PREPARATION

Preparation of the ceramic veneer.

Go over the framework with a green stone.
Sand with aluminium oxide between 110 – 150 μm, (pressure 2.5-3 bars).
Clean the surface with a steam jet.
Oxidation: Maintain for 5 minutes at 900ºC under vacuum, maximum temperature rise (55°C/min).
Then sand with aluminium oxide at 250 μm/3-4 bar and clean the surface again with a steam jet.
Apply the bonding layers and opaquer layers as normally performed in your laboratory.
Then apply the different ceramic veneers according to the manufacturer’s instructions.

Download technical data sheet

– TABLE OF SOLUTIONS –

	Sintex	Milled	Sintered	Zirconia	Disilicate	PMMA
NATURAL TOOTH
CROWN / ABUTMENT
BRIDGE
BAR
HYBRID

On interface