Lithium Disilicate


Lithium Disilicate is a material that is particularly recommended for all those high aesthetic treatments in the anterior teeth region, while also offering good mechanical properties.

Bioinnovación Dental uses the highest quality product on the market, the IPS e.max CAD by Ivoclar Vivadent. This, combined with our experience in framework design and milling, gives an excellent result at the most competitive price on the market.

Our Lithium Disilicate units are the best alternative to the same material injected in laboratory, thanks to the fact that it saves labour and time and prevents possible breakages during the fabrication process, all at an extremely competitive price


Preparation of the ceramic veneer.

  1. Go over the framework with a green stone.
  2. Sand with aluminium oxide between 110 – 150 μm, (pressure 2.5-3 bars).
  3. Clean the surface with a steam jet.
  4. Oxidation: Maintain for 5 minutes at 900ºC under vacuum, maximum temperature rise (55°C/min).
  5. Then sand with aluminium oxide at 250 μm/3-4 bar and clean the surface again with a steam jet.
  6. Apply the bonding layers and opaquer layers as normally performed in your laboratory.
  7. Then apply the different ceramic veneers according to the manufacturer’s instructions.